News

two、 Frequently Asked Questions about Garment Steam

Update:26-01-2022
Abst:

two、 Frequently Asked Questions about Garment Steamers […]

two、 Frequently Asked Questions about Garment Steamers

3. Reasons and solutions for the out-gassing of the garment steamer.
①The design principle of each brand of garment steamer is different, and some may be blocked by the water inlet. The phenomenon in this case is that the main unit will heat up, and there will be no gas without steam;
②The main engine of the garment steamer has the sound of boiling water but no steam is ejected. In this case, the duct may be blocked. Quickly shut down and clean the steam duct and the air outlet of the ironing brush panel;
③ If there is no sound of boiling water, and the main unit is not hot, it may be that the inner tank is broken, or there is a problem with the circuit.
④If the new machine does not have steam, there is a problem, go to the dealer to solve it;
⑤If the steamer has been used for a long time, it may be broken, please contact the maintenance department to repair it. Under normal circumstances, it will not produce steam. It is very simple to have a heating core inside. As long as it can be powered on normally, the water tank has Water will have steam.

4. The solution to the problem of automatic power off when the steamer is short of water.
①In use, when the temperature of the heating pot reaches a certain level, it will automatically power off. First of all, determine whether you forgot to add water or run out of water, and then determine whether the lower water inlet hole is blocked. If it is for these two reasons Depending on the situation, it should be fine.
Summary: The main reason for this situation is that it is controlled by the temperature control switch of the garment steamer, which should be a safety measure!
②Fuse control:
When the temperature of the heating pot reaches a certain level, it may cause the fuse to blow out automatically, just reconnect it.
③Fuse circuit board problem:
If you don't have a little professional knowledge, you should not be able to find the reason, so you must send it to a professional garment steamer repair point to avoid other things that shouldn't happen!

0

Recommended Products

Ningbo Jiqing Electrical Appliance Technology Co.,Ltd.

CONTACT US