Common problems and solutions of cleaners

Common problems and solutions of cleaners
1. How much power should be used for small household cleaners?
If you choose a small household cleaner, of course, you need to choose a small vacuum cleaner with a power of 800W and above, and it is better to choose a vacuum cleaner with a power of 800W and above.

2. How to reduce the noise of the cleaner?
According to the brand cleaner list zhenxing8.com, if you want to reduce the noise of the cleaner, you can effectively reduce a certain amount of noise through the degree of machine sealing and the noise reduction technology of a large manufacturer. If the user wants to effectively reduce the noise, the best way is to adjust the power to reduce the noise. In general household cleaning, it can basically be done with the minimum power, so the noise of this cleaner will be much reduced. And effective energy saving. Another is that during use, opening the home windows can effectively reduce noise echoes.

3. Why does the cleaner get hot?
After receiving the product, users who have no experience in using household cleaners find that the surface of the machine is a little hot, and they will be confused or even afraid to use it. In fact, this is a normal phenomenon, because the current cleaners on the market all use series motors. The series motors run at high speed (about 40,000 rpm), and a lot of heat is generated during the process of forming a vacuum. At present, the "national standard" "The requirement is that through various unobstructed heat dissipation methods, the temperature measured at the air outlet is below 65 degrees, and it is normal for the vacuum cleaner to have a temperature rise that meets the requirements.

4. Can the cleaner suck hair, pet hair, or vacuum bags?
These can be sucked, but I want to remind everyone here that if you inhale a lot of hair or paper balls, sometimes these sundries will be blocked in a certain part of the straw, which may affect the suction and exhaust. Dissipate heat, which will cause the cleaner's load to be too large (the motor may be damaged over a long period of time). Personally, it is recommended not to install a brush head when sucking hair, but to suck directly with a straw.